PRO WALL & FLOOR TILE CHEMICALS
Cerafix 200
Ready-mixed adhesive for ceramic tiles, terracotta and small natural stones on indoor walls and floors
- NON-SLIP
- LOW VOC
- SELF-CURING
- GRADE
- C1T · TYPE 1
- STANDARD
- IS 15477
- TIER
- General Purpose
OVERVIEW
Cerafix 200 is a ready-mixed, polymer-modified, cement-based adhesive for fixing ceramic tiles, terracotta and small natural stones on walls and floors over cementitious surfaces, indoors. Made from cement, fine selected sand and special additives, just add water and it's ready
CONSUMPTION
1.2kg/m² per mm of thickness
OPEN TIME
20
minutes
POT LIFE
4+
hours
KEY FEATURES
WHY CERAFIX 200
- 01
High bond strength with no shrinkage cracks
- 02
Non-slip, with excellent initial grab
- 03
Self-curing, with very low VOC
- 04
Easy to use: just add water
- 05
Bonds to a range of cement-based surfaces
- 06
Fixes ceramic, terracotta, brick, vitrified tiles, natural stone and large format tiles*
- Vitrified tiles: recommended on floors only, up to 4 sq ft per tile
- *Large format tiles: use with a grout admix. Talk to the Cerastone technical team before you start
WHERE TO USE
Built for these surfaces
- FLOORS
- WALLS
- INDOOR
SUITABLE SUBSTRATES
- Concrete
- Cement plaster
- Brick masonry
- Cement based screeds
- Cement based surfaces
APPROVALS
- IS 15477:2019 Type 1
- C1 T as per EN 12004-1:2017
Technical data
C1T · TYPE 1PROPERTIES
- Consistency
- Powder
- Colour
- Grey
- Bulk density
- 1420 kg/m³
- Mixing ratio
- 5.0–5.5 litre water per 20 kg bag
- Consistency of mix
- Pasty
- Pot life @ +23°C
- Over 4 hours
- Application temperature
- +5°C to +35°C
- Slip resistance / vertical slip (T)
- ≤ 0.5 mm
- Open time @ +23°C
- 20 minutes
- Adjustability time
- Approx. 20 minutes
- Set to foot traffic
- 24 hours
- Max thickness allowed
- 12 mm
ADHESION STRENGTH
- After 28 days
- > 0.8 N/mm²
- After heat ageing
- > 0.8 N/mm²
- After water immersion
- > 0.8 N/mm²
- After freeze-thaw cycles
- > 0.8 N/mm²
